Ready Lift 66-5055 05-10 Toyota Tacoma 2WD & 4WD, 6-Lug 2.25" Front Leveling Suspension - Strut Extension

Ready Lift 66-5055 05-10 Toyota Tacoma 2WD & 4WD, 6-Lug 2.25" Front Leveling Suspension - Strut Extension Review

Ready Lift 66-5055 05-10 Toyota Tacoma 2WD & 4WD, 6-Lug 2.25" Front Leveling Suspension - Strut Extension Feature

• Keeps your factory ride - Guaranteed
• Will never wear, break or fail - Guaranteed
• Toughest finish - Guaranteed
• Safest way to level lift - Guaranteed
• Safely installs without compressing struts, Fixed Lift, 10.9 rated mounting studs, Powder coated - Solid steel construction, Made from 7mm plate steel (over 1/4" thick).

ReadyLift® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift® steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed! The 66-5055 strut extension provides 2.25" of lift which gives clearance to add up to 32" wheels and tires to the 2005-2010 Toyota Tacoma 2wd & 4wd and PreRunner. 33' tires can be used with some minor trimming of the inner fender panel. 33" Tires will only work using an OEM wheel or OEM wheel-equivilant backspaced wheel. Some minor trimming may be required. Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift® can be installed one to two hours and costs less than the price of a single custom wheel. All ReadyLift® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a non-TRD truck. If you measure the truck at stock height, then install a strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0" (66-5001) Rear Block Kits.